Tips on Building a Good Red Eared Slider Tank

Proper Red Eared Slider Tank Setup

When making your red eared slider tank, you need to know the proper equipment that is required. The red eared slider habitat should be anywhere from 20 to 50 gallons to begin with, depending upon its size and needs. Having enough room in your water turtle tank is extremely important. As a rule of thumb, it is actually best to have approximately ten gallons of water for every inch of turtle in an aquatic turtle tank. For example, baby red eared slider turtles, such as a seven inch turtle should have a seventy gallon tank. This is the best size for the optimum red eared slider turtle care. You need to have both water and "land" in red eared slider turtle tanks. The water ought to be deep enough for the to submerse itself completely. Remember that red eared sliders are aquatic turtles, so they spend a great deal of time in the water. However, remember that they CANNOT breathe under water, so it is imperative for it to have "land" to rest on. Also, do not put wood chips in pet turtle tanks, as your turtle may eat them (which is bad) or they may rot or grow fungus.

If you do not use one, you will need to keep an eye on your turtle's water to make sure it remains clean. If your turtle becomes stuck in the system and stays underwater for too long, it can drown.

It is important for your pet turtle to keep warm. Ideally, their tank should be kept between 75-80 degrees Fahrenheit. You may lower the temperature 5-10 degrees at night. You can use a heat lamp to maintain the tank at the right temperature.

This is usually the result of removing the turtle from indoor to outdoor, or vice versa. Red eared sliders are cold-blooded reptiles and can be very sensitive to sudden shifts in their environment. There is also other great information on the web to help you build the ideal red eared slider tank. Check out the link above for additional information.